Türkçe 
中文 
FNC MT Series Analog Programmable Encoders | Limits in Your Hands
You can determine the analog output limit values with the products developed by Fenac. The programming keys are used to determine the start and end points.
You can choose the number of turns and analog output type of Fenac MT series encoders as you wish.
You can set your analog output with one of 0-10V, 4-20mA, 0-5V, 0-20mA options.
Starting and ending points are very easy to determine! You can program Fenac MT series encoders in 3 steps.
1. Hold down the A and B buttons for 10 seconds / the LEDs start flashing.
2. Hold down the A button and set the start point. The / A led lights up steadily.
3. The encoder shaft is moved to the stop position. B is held down. LED A and B are lit. Programming is complete.
To restore Fenac MT series encoders to the factory settings, press and hold the A and B buttons for 30 seconds. The LEDs will flash quickly.
With the encoders of the Fenac PAA series, which is particularly preferred in multi-turn applications such as linear motion, you can avoid amplitude losses in analog reading and have a full performance system.
You can get more information about the use of our MT Programmable product from our video on the Youtube channel. Click to watch the video!